Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
How do you turn the speaker power on and off?
#3
I've used a power strip aka what you call a multi-tap?? i think.
I have used it with 2 phantoms and the dialog.
So no reason why it could not work electrically providing your multi-tap and circuit its plugged into are both rated for more power than you are consuming.

"requires about 360W of power" assuming that is a MAX power consumption???
Power = volts * amps or about 3 amps at 120volts.

From my observation *I am not an electrician and this is not electrical advice* Smile
Most of the circuits in my home for outlets are typically 10A 120volt (us) so should not plug 5 of them all into 1 outlet.
Last time i looked into the specs and discussed with Devialet, they told me a 10A circuit is required.

The 360W number is interesting and a much more accurate reflection of actual use perhaps?
1800W (360x5) at 120v US power is about 15A

If any of the previous assumptions are true i would be looking for a circuit and Mult-Tap (power strip) with a min of 15 or better yet a 20 amp 120 US volt rating to support 5 devices.

Again certain assumptions are being made consider this all bad advise and you should ask a professional. Wink especially if you are not using 120v and or outside the us.

hth
scott-
Reply


Messages In This Thread
RE: How do you turn the speaker power on and off? - by scotthar - 28-Apr-2021, 04:44

Forum Jump:


Users browsing this thread: 3 Guest(s)