06-Nov-2021, 18:22
Hi all,
New to the forum and new to discovering Devialet speakers! Potentially purchasing some soon for Near-field monitoring at full-range from 20Hz to 20 KHz at a listening level of of around 73dB SPL C-weighted. I Wanted to see what the best way of going-about connecting everything together is first.
I currently have the Black Lion Audio Revolution 2x2 Audio Interface:
https://dt7v1i9vyp3mf.cloudfront.net/sty...pO7THJ.jpg
It has the following connections at the back:
2x TRS Balanced 6.5mm jack outputs
S/PDIF Digital Input - coax-style
S/PDIF Digital Output - coax-style
My plan is to connect the Phantom's to my surge-protector multi-plug to be able to enable PLC mode to connect both speakers together.
Then use a S/PDIF Coax to S/PDIF toslink converter box:
https://www.amazon.co.uk/PORTTA-N3C21BT-...WNrPXRydWU=
To then connect my audio interface to one of the Phantom's toslink inputs. This would be done via optical direct mode to reduce latency I think?
Would this allow for stereo playback from my audio interface to the Phantom speakers?
Would this potentially need to be done an alternative way?
Also thinking of the Phantom 2's and then connecting each separately by using 6.5mm TRS to 3.5mm jack cables to each speaker but I'm presuming the Phantom 103dB will give me a full 20Hz - 20Khz listening experience instead.
Thanks all for your help and time!
New to the forum and new to discovering Devialet speakers! Potentially purchasing some soon for Near-field monitoring at full-range from 20Hz to 20 KHz at a listening level of of around 73dB SPL C-weighted. I Wanted to see what the best way of going-about connecting everything together is first.
I currently have the Black Lion Audio Revolution 2x2 Audio Interface:
https://dt7v1i9vyp3mf.cloudfront.net/sty...pO7THJ.jpg
It has the following connections at the back:
2x TRS Balanced 6.5mm jack outputs
S/PDIF Digital Input - coax-style
S/PDIF Digital Output - coax-style
My plan is to connect the Phantom's to my surge-protector multi-plug to be able to enable PLC mode to connect both speakers together.
Then use a S/PDIF Coax to S/PDIF toslink converter box:
https://www.amazon.co.uk/PORTTA-N3C21BT-...WNrPXRydWU=
To then connect my audio interface to one of the Phantom's toslink inputs. This would be done via optical direct mode to reduce latency I think?
Would this allow for stereo playback from my audio interface to the Phantom speakers?
Would this potentially need to be done an alternative way?
Also thinking of the Phantom 2's and then connecting each separately by using 6.5mm TRS to 3.5mm jack cables to each speaker but I'm presuming the Phantom 103dB will give me a full 20Hz - 20Khz listening experience instead.
Thanks all for your help and time!
