(29-Oct-2022, 04:09)docvale Wrote: your Ortofon is reported to output at 0.5mV (which is what you would report on the expert configurator) and likes an impedance of >20ohm (which is super low) and you might start playing at 100ohm and take it from there. Alternatively, you might want to consider a SUT, such as the Ortofon ST-7 (developed for Quintet cartridges), which would likely require to set the output seen by the Dev phono to around 7mV (so, MM territory) and to load it at 47kohm.
Thank you.
Max level i set at 500 mv
Loading so i leave it at high and then i selected 100.
I am hoping this it should be.
Sent from my iPhone using Tapatalk
