13-Feb-2023, 03:04
(11-Feb-2023, 21:05)MosesMagnum Wrote: B****r!
I was hoping I could be lazy and do it all from my seat.
Thank you though for your time.
@MosesMagnum You can, that is how I do it. You program the remote. You assign one button to mute and apply the mute to the speakers only (in the settings). When you press, speakers go on mute and subs (I have two) keep on working.
I program one other button as "pre-out" (on/off) and in the settings I set: pre-out on: speakers high pass filter, subs low pass filter, pre-out off: obviously subs off, speakers back to full range. This way, I can easily compare my system with and without subs.
I took me quite a while to find the right HPF and LPF and delay but now perfectly blended. REW shows +/-10 degree phase shift in the whole overlap but for most part it is less then 5 degrees. The overlap in my case is about 40-70 Hz. Many speaker manufacturers would be happy to achieve such low phase shift.
Win10/HQPlayer / Roon - Uptone Audio Etherregen switch / SOtM-SMS-200 ultra with clock input - Mutec REF 10 clock for the switch and the streamer - Denafrips GAIA DCC - Devialet D800 - YG Acoustics Carmel - Dual Elac SUB-2090
power supplies: Uptone JS-2, SOtM SPS-500
