09-Mar-2015, 17:15
(09-Mar-2015, 14:32)Womaz Wrote:(09-Mar-2015, 14:25)Ron D Wrote: So you have your M1CLIC acting as a source into the 200? If its running into the 200 via the analog inputs I believe that you are not using the 200's DAC but the signal is being sampled at either 96 or 192. You say " the CLIC is not digitally connected" so then you are NOT using the 200's DAC.
It really doesn't matter that you have attached the MH amp via the pre-amplified outputs as the input path will determine if the 200's DAC is being used or not and it appears that you are not using the 200's DAC. at least this is what I believe and I am far from an expert here...
Thanks , that is exactly how I have seen it too.
That's not correct. All inputs whether digital or analogue will go through the Devialet DAC. Any analogue inputs are digitised first using the Devialet's ADC.
Guillaume
Industry disclosure: UK distributor for Shunyata Research
220 PRO, totaldac d1 server with additional external power supply, totaldac d1-seven, Echole PSU for Totaldac, Wilson Audio Sasha 2, Shunyata Research cables, Shunyata Hydra Alpha A10 + DPC-6 v3, Various Entreq ground boxes and cables, Entreq Athena level 3 rack, 2 X SOtM sNH-10G with sCLK-EX + 10MHz Master Clock input + sPS-500 PSU, i5 sonicTransporter w/ 1TB SSD
UK
