Speaker feet suggestions

[Mikeeo]

Hi
I have the PMC 23s and love them but one thing I have never liked is the spiked feet on these.
They sit on wooden floor with floor protectors but I have just never liked them.
Anyone have any suggestions on anything that can improve on this. Budget has to be reasonable. The only thing I have come across which look like the type of thing I am looking for is from Nordost and its way out of the price range.

I am also considering an upgrade in the next few months and the 26s are a consideration , but the one thing that puts me off is the spikes and feet.

Any help appreciated as always

Hi,

These are ridiculous expensive (I guess Füt or Cone) and do not even look at the Ansuz feet there it gets even worse price wise.

If you know a metal workshop, let them have a look at the construction and have them make something the same, order ceramic balls on Ebay. I bet you 1/10 of the price.
I asked here in Sweden and I landed there about in price. 
Otherwise there is very cheap China/Taiwan made aluminium 'damping' constructions for one or more balls on Ebay, buy these and add some ceramic balls of your flavor, preferable zirconium oxide or silicon nitride. See if that works, because the Nordost or Ansuz for sure does not do things better.
By the way, the Raidho 'diamond' coating on their D-series cost about GBP 0,5-5 per cone to coat depending on how big vacuum chamber system that is used. I did a lot of this mixed graphite/diamond coatings during my PhD studies in the 90's. 

By the way doing the 'cheap' route from Ebay purchases and now testing it on my Raidho X1 really took the performance some notches upwards. 

/Mike