Thread Rating:
  • 2 Vote(s) - 4.5 Average
  • 1
  • 2
  • 3
  • 4
  • 5
AIR 3 Beta for Mac
(05-Jun-2016, 10:06)Zerzio Wrote: I've installed the AIR3 Beta on my Mac Mini using Roon (Ethernet to the D200). In Roon I've tried multiple settings (integer mode, exclusive mode). The Mac Mini is remotely controlled from a MacBook Pro. The music plays during 1'50'' (from Tidal account) and then suddenly stops and I loose the connection to the Mini. It's like AIR3 screwed something at network level.

Hi - have you also selected Max Hardware Buffers and Power-of-2 Buffers? These are a must for AIR to work.
NUC i5/ROCK/Roon Lifetime =>  Original d'Atelier CoreInfinity #066 => Transparent MusicWave+ =>Wilson Sophia 3
Reply
(05-Jun-2016, 11:01)Zappydev Wrote: have you also selected Max Hardware Buffers and Power-of-2 Buffers

Yes These are done on my Roon settings too. However I m not sure if this is for AIR3. I had it enabled even before AIR3 was available. i m guessing these Roon settings are to ensure the hardware (my case MacBook-Air) where Roon is installed is available max for Roon. Will it help AIR3?, one can quickly try this disabled and see if AIR3 continues to work. [I will try it out (scared), but will give it a shot]
Rock OS (Roon) on NUC 2016 Model (ETH Wired to Router) > Cat8 from Router to switch to 220Pro (CI) > RAAT/AIR > Monitor Audio PL300 II
Ipad Mini 4/iPhone for Roon Remote"
Reply
Tried the following settings on Roon for AIR3-ETH streaming.
Mode-1                                              
Max Hardware        -DISABLED            
Power-of-2 Buffers  -DISABLED              

Mode-2
Max Hardware        -ENABLED
Power-of-2 Buffers  -ENABLED

In Mode-1, within 1st track, half way through, Roon remote lost its connection with RoonServer. When i checked on Roon status on MacBook it was switching between "Error"- "Not-Responding" and "Started" ... it was annoying to see it was switching between these status. I had to re-start MacBook. Tried above once again and the flow was repeated ending with MacBook restart. Tried one last time (4th attempt) with same flow of events ending with macbook restart.

After 4th restart, first thing I did was to set Roon in Mode-2.
Did not find any issues streaming hires (24/192) or from Tidal. All worked smoothly Wink !

My take on this issue is not related to AIR3. It is Roon that needs un-disturbed resources.
Rock OS (Roon) on NUC 2016 Model (ETH Wired to Router) > Cat8 from Router to switch to 220Pro (CI) > RAAT/AIR > Monitor Audio PL300 II
Ipad Mini 4/iPhone for Roon Remote"
Reply
Does this mean that when running in Mode-1 the use of the computer where the core resides will be severely impacted, as most of the resources are taken away to run Roon?
Technics SL-1200G | Ortofon Cadenza Bronze | Audio Technica AT-ART9 | Hana ML
Nucleus+ | Melco N1ZS/2EX | D100 | S100 | Telegärtner M12 | Accustic Arts Drive II
Devialet Original d'Atelier | Vivid Audio G3 Giya
Gold Phantom Opéra de Paris
S  I  N  G  A  P  O  R  E
Reply
After many attempts, I have finally gave up. AIR3 on my Mac Mini A1283 (late 2009) simply can't play high-res music well. I just use it for CD-quality materials including Tidal music.
Before: Le200, KEF LS50, AQ Type4, NUC 5i5RYH/8GB/128GB M.2SSD, Roon, Win8.1/AIR2.1.3/RoonBridge, MM/AIR3/RoonBridge, QNAP TS-212P 5TB NAS, AQ NRG-X3

Now: KEF LS50W, NUC5i5RYH/8GB/128GB M.2SSD, Roon, QNAP TS-212P 5TB NAS,iFi iSilencer3.0+DC iPurifier+iPurifier2, Sonos ZP80+SPDIF iPurifier


Location: Cyberjaya, Malaysia
Reply
(06-Jun-2016, 06:39)tategoi Wrote: Does this mean that when running in Mode-1 the use of the computer where the core resides will be severely impacted, as most of the resources are taken away to run Roon?

Experts can answer better but my understanding is this is due to Old gen Processor to New generation Processor. I think new generation of microprocessor based headless/laptop will not have this issue or dont need to enable the max usage etc.

However if we are going in for dedicated usage to stream music using a Old/ latest 6th generation NUC/Mac ( run RoonServer or whatever), whats to loose if we operate in mode-2 Smile ? I m just saying.
Rock OS (Roon) on NUC 2016 Model (ETH Wired to Router) > Cat8 from Router to switch to 220Pro (CI) > RAAT/AIR > Monitor Audio PL300 II
Ipad Mini 4/iPhone for Roon Remote"
Reply
Being a glutton for punishment I installed Roonbridge and AIR 3 on my iMac.  Converting DSD to pcm.

I'm using link aggregation on it and it's the top of line current gen iMac loaded up and my only Mac running 24/7.


Had been away for 4 weeks seeding this years crops.  Listening to my system again after the sabbatical I found it a bit thin, bright and uninvolving.  SOTM USB->Transparent USB Cable->Roon

AIR fixed that right up!  Please let it be stable with my overkill machine.
Roon->HQPlayer->McIntosh C47->McIntosh MC301s>Transparent Super->Wilson Audio Sabrinas w/ Shunyata Denali, Rega RP8, Rega Apheta 2


Reply
Dr Tone - I am curious - where are you using link aggregation? Your NAS?
Roon ROCK on Intel NUC6i5SYH/Ethernet | VPI Avenger | Devialet 440 Pro CI | Vivid Audio Giya G3 | Auralic Aires Mini | Synology 1812+ NAS
SXSW, US
Reply
(11-Jun-2016, 01:58)baddog Wrote: Dr Tone - I am curious - where are you using link aggregation? Your NAS?

Hyper-V host, NAS and iMac.
Roon->HQPlayer->McIntosh C47->McIntosh MC301s>Transparent Super->Wilson Audio Sabrinas w/ Shunyata Denali, Rega RP8, Rega Apheta 2


Reply
Ah, got it. I was going to using Link aggregation on my NAS until I found out it makes no difference for single client performance.  

My specific being scenario being the Mac Mini running RoonServer communicating with the NAS which has my music files. No other systems in the household accessing the NAS concurrently ( or let us say, a rare event ). I understand the value in homes where there are multiple clients accessing the NAS.
Roon ROCK on Intel NUC6i5SYH/Ethernet | VPI Avenger | Devialet 440 Pro CI | Vivid Audio Giya G3 | Auralic Aires Mini | Synology 1812+ NAS
SXSW, US
Reply


Forum Jump:


Users browsing this thread: 24 Guest(s)