07-Dec-2015, 06:51
You need a nice humpy target curve from about 150 hz down to get decent bass slam... ending up at about +4- +6db just below where your speaker roll off occurs.
Only thing with both Dspeaker and dirac.. is that you need amp overhead.. normally a -6db attenuation (or more) is applied to avoid digital clipping , so if lets say 100W gave you loud enough , you will need 400w to negate the -6db if using either..
Only thing with both Dspeaker and dirac.. is that you need amp overhead.. normally a -6db attenuation (or more) is applied to avoid digital clipping , so if lets say 100W gave you loud enough , you will need 400w to negate the -6db if using either..
Roon/tidal > Squeezebox touch > Trinnov St2 or DIRAC (minidsp ddrc-22d) > Dual mono D premiers > Vivid Audio Giya G1 Spirits ...fully treated dedicated 6x8m room