22-Jul-2015, 11:19
(22-Jul-2015, 01:20)kenreau Wrote:(06-Jun-2015, 13:10)Bartype Wrote: Thank you for your reply and suggestions. I have connected another set of cables, the same result within Anthem ARC (Anthem Room Correction). But when i do it manually there is a readout after 3 or 4 testones (10 needed per speaker for ARC tot do it's thing). That seems to be the reason why ARC is not working, there is a latency before it's picked up by the microphone, which is not there with the directly connected speakers (those still sounds louder with the testtones).
When i just play a movie, it seems the Spendor's connected to the Devialet (configured with pass thru at 2 Vrms and 0db) just seem to work at good volume. Now it's possible to do a complete manual setup, but ARC is just one of the best methods tot do it for you so... But for now it seems an issue for which i have to look at the Anthem.
I've noticed similar lack of volume level issues in my HT setup and D200 bypass setting. I can't recall the configuration dB settings, but I have to use my Integra Preamp/Processor at nearly 90% of the available volume range on it for a solid immersive sound, especially on an action movie. This is after running the dsp Audyssey MultEQXT32. If I read correctly, no luck with altering the Devialet configuration bypass settings?
Thx
Kenreau
Wel, i have it working now and being able to use the ARC system of the Anthem. Pass thru is set to 2 Vrms and 0 db pass-thru. Still, the Anthem has to set the fronts, controlled by the Devialet to around +8 db, while the center and surrounds are around 0 db...
But it works, and music in movies and series never sounded this good!
Devialet 250 Expert Pro / Nordost Valhalla Bi-Wire / Sonus Faber Olympica II
Anthem MRX 710 / B&W MT-60D
Paul Hynes SR7/T LPS / Intel Core i7 NUC-Plato X7D with Roon Lifetime / Melco S100 Switch with 2 x Ansuz Ethernet A2
Dr. Feickert Woodpecker II with Inertia Platter / Dr. Feickert Linear / Jelco TK-850L Arm / Shelter 501 III Cartridge
Power: AQ Niagara 3000 with AQ Tornado to Furutech wall outlet <-> Doepke DFS 2 F Audio Fuse Box and 3 x AQ Blizzard to Components
Anthem MRX 710 / B&W MT-60D
Paul Hynes SR7/T LPS / Intel Core i7 NUC-Plato X7D with Roon Lifetime / Melco S100 Switch with 2 x Ansuz Ethernet A2
Dr. Feickert Woodpecker II with Inertia Platter / Dr. Feickert Linear / Jelco TK-850L Arm / Shelter 501 III Cartridge
Power: AQ Niagara 3000 with AQ Tornado to Furutech wall outlet <-> Doepke DFS 2 F Audio Fuse Box and 3 x AQ Blizzard to Components