Power direct from the wall, or Power Conditioner?

[Lacee]

I have a dedicated 20 amp breaker but it is two phase because I use a Torus RM 20( true balanced from the panel), balanced power conditioner.
I use 10 feet of DH Labs Red wave power cable from the 20 amp split breaker( 120/120)from the breaker and panel to the Torus using a 20 amp Furutech plug.So there is no extra outlet box ( GTX) or power cord needed in this configuration.The Devialet is plugged into the Torus with Shunyata Delta NR 2 power cord.
The cd player and turntable are also plugged into the Torus.
The Torus has a ground pin.I attach ground wires from the Turntable, Devialet and cd player to the Torus and one ground wire from the Torus back to the panel's ground wire.The power cord from the breaker to the panel has 2 live runs,120/120 in full balanced mode and  the third ground wire from this DH Lab power wire is connected to the ground bus bar on the panel.
No noise anywhere, anytime, day or night. I also use 2 Nordost QV2 and Nordost QK1
 The are only two breaks in the power from the panel to the Devialet.
One is the 20 amp plug into the Torus and the other is the power cord to the Devialet.