18-Sep-2014, 00:17
(17-Sep-2014, 23:46)theaudioguru Wrote: Hi Guys,
I'm not having any success with getting the inputs on the slave to play.
They show up on the display but no sound, what am I doing wrong?
The supplied cable is connected per configurator and I have a mini cable between master and slave but don't know if it is correct.
Could someone post a diagram or pic of those who have successfully accomplished playback from the slave?
thanks,
audioguru (or not
Dear audio Guru,
First of all, I wish to express that I have nothing but admiration for the british humor
Anyhow, in favour of a more pragmatic approach I would say that to use the inputs of a slave you should first use the RCA/RCA link (not the RCA - AES/EBU).
Then left click on the slave link RCA connector. A pop-up will appear where you have to select "Share sources from slave".
Select and Parametrize the inputs you need.
Then you have the 2 configurations (Master + Slave) to save. Each of them on a memory card.
First test:
Normally, when you start your amp with the remote controller (or by pushing the front button of the master amp) a few seconds later you will notice on the display of the slave amp that the 2 amps are synchronized.
France: Totaldac d1 server / d1000 PRO / klinger favre s30 speakers