18-Sep-2014, 15:26
(18-Sep-2014, 15:07)theaudioguru Wrote: Thanks aerki for your kind comments and prompt reply
I have the amps synced ok but think I messed up with the trigger cable. On the configurator it shows a grey line indicating the trigger cable I believe. Do I also need to enable the trigger on the configurator?
Thanks
audioguru / partime apprentice
The trigger cable automatically appears on the configurator when the slave inputs are enabled, so no further action is required there.
I had a problem myself which turned out to be a problem with the link cable itself being faulty.
There are 2 sockets which take a miniature (⅛") TRS jack
on the back of the Devialet. One possible mistake is not using the correct ones.
The link cable goes from the lower one on the master to the upper one on the slave.
Devialet Original d'Atelier 44 Core, Job Pre/225, Goldmund PH2, Goldmund Reference/T3f /Ortofon A90, Goldmund Mimesis 36+ & Chord Blu, iMac/Air, Lynx Theta, Tune Audio Anima, Goldmund Epilog 1&2, REL Studio. Dialog, Silver Phantoms, Branch stands, copper cables (mainly).
Oxfordshire