10-Oct-2014, 17:02
I haven't changed much in my configuration for yonks, I enabled the USB and Ethernet inputs with the intention of trying them one day, but haven't yet...
My only problem has been that my slave unit does not always read its SD card. Sometimes I have to remove it and put it back more than once before it recognises something other than "factory configuration".
Also, I switch everything in the house off at the plug before going to bed. I switch on again the next day and 4 times out of 5 the slave comes on as a 250 in factory config. Again either unplugging the SD card or recycling the mains switch several times is reqired. I am pretty fed up about it because my D-Premiers were perfectly reliable until the update (I now think of it as a downgrade...). Both had SD card faults immediately following the update, the master latch failed on the SD card slot and the slave had this fault. They went back to Devialet and the master came back fixed but the slave is still defective, either in hardware or software.
My only problem has been that my slave unit does not always read its SD card. Sometimes I have to remove it and put it back more than once before it recognises something other than "factory configuration".
Also, I switch everything in the house off at the plug before going to bed. I switch on again the next day and 4 times out of 5 the slave comes on as a 250 in factory config. Again either unplugging the SD card or recycling the mains switch several times is reqired. I am pretty fed up about it because my D-Premiers were perfectly reliable until the update (I now think of it as a downgrade...). Both had SD card faults immediately following the update, the master latch failed on the SD card slot and the slave had this fault. They went back to Devialet and the master came back fixed but the slave is still defective, either in hardware or software.
Devialet Original d'Atelier 44 Core, Job Pre/225, Goldmund PH2, Goldmund Reference/T3f /Ortofon A90, Goldmund Mimesis 36+ & Chord Blu, iMac/Air, Lynx Theta, Tune Audio Anima, Goldmund Epilog 1&2, REL Studio. Dialog, Silver Phantoms, Branch stands, copper cables (mainly).
Oxfordshire
