19-Nov-2014, 23:59
Hi,
I put my order to Audioprana on halt. I have ordered some Lundahl 1574 (75 to 110 ohm conversion). These I will install, due to their very small size inside the Neutrik XLR connector ie more or less directly soldered to the XLR pins.
First I will modify my current BNC-RCA to a BNC-75 ohm coaxial-1574-XLR to be used between the Unitiserve and Dev AES/EBU input.
I will report back asap I've put some mileage on it.
By the way, can anyone here confirm that when linking (configuring) Dev units in the RCA-XLR that the Companion is set to receive a 75 ohm signal instead of 110 ohm at the AES/EBU input!?
And why, when using the AES/EBU input no other inputs can be used on the Companion?
Best/Mike
I put my order to Audioprana on halt. I have ordered some Lundahl 1574 (75 to 110 ohm conversion). These I will install, due to their very small size inside the Neutrik XLR connector ie more or less directly soldered to the XLR pins.
First I will modify my current BNC-RCA to a BNC-75 ohm coaxial-1574-XLR to be used between the Unitiserve and Dev AES/EBU input.
I will report back asap I've put some mileage on it.
By the way, can anyone here confirm that when linking (configuring) Dev units in the RCA-XLR that the Companion is set to receive a 75 ohm signal instead of 110 ohm at the AES/EBU input!?
And why, when using the AES/EBU input no other inputs can be used on the Companion?
Best/Mike
Ex D400 Now Aavik U-300/Feickert Woodpecker2-Kuzma 4P-Kondo silver-Benz LPS-Teddy Pardo PSU/Naim Unitiserve-Teddy Pardo PSU/SF Guarneri Homage/Whole system decoupled by Ansuz DTC/Cables from Ansuz, DYI and other commercial/Dedicated mains and spur-Lampizator SILK