Master/slave link

[Mikeeo]

Finally the Neutrik adapter XLR to RCA is here. As planned, will use it with my XLR van den Hul interconnect for my master / slave RCA-XLR link

Will work on a new configuration for my D400 and report back later

Quick question, if you don't mind: did you re-configure the master as well as the slave?   (I guess it should only be necessary to change the slave configuration.)  I'm hoping to have a play with this over the next few days since I now have an RCA-to-XLR adapter.

I assumed that i have to change both configurations and did not try otherwise. And I still believe you have to update both master and slave config files, as there has to be a way to let the master know that the slave now is on the XLR link, again assuming that Devialet has some sort of an algorithm to manage the change from 75 to 110 Ohms 

Hi,

As reported elsewhere, the info from Dev (Thierry) there is none such, just 110 ohm transformer coupled input. I tried RCA to XLR 75 ohm cable one with a transformer (75/110 ohm) as  without, for me no difference.
Still have to try  with 110 ohm cable as Thierry suggested.

/Mike