06-Aug-2014, 12:56
(This post was last modified: 06-Aug-2014, 12:57 by Georgethesixth.)
(06-Aug-2014, 02:40)Krorghar Wrote: Ok guys, I have tried something different.
I have connected DIRECTLY the Dev and my PC using another Ethernet port my motherboard had available.
Have configured the new Subnet following the steps on this tutorial by Rufus:
http://devialetchat.com/Thread-Direct-co...rnet-Cable
PC is 192.168.100.1
Dev is 192.168.100.2 pinged and respond.
Mask is 255.255.255.0
It wont let me set the gateway to 192.168.100.1 Dont know why.
Still no connection. I dont know what to try next, can anyone help pls?
Can I suggest you start by disabling (temporarily) your firewall ? The Devialet is sending a stream of 'Hello, here I am'-packets. If the AIR-client cannot see those packets, you have a problem. It all depends on what you said when Windows asked you if 192.168.x.x was a private or a public network. If you said is was a private network, everything should work, if you said it was a public network, the firewall will block all incoming packets.
To de disable the firewall in Windows 8, do 'search'. Type 'command' and enter : you will now see the command prompt. Do a right-click and select 'Run as an administrator'. In the command prompt, type 'netsh advfirewall set allprofiles state off' and enter. This should do the trick. Remember to turn on the firewall afterwards.
In Windows 7 : do start - administrative tools - command prompt - right click - run as administrator etc.
Success and please give some feedback ! This is one we could add to the FAQ.
