(24-Feb-2015, 11:56)DDstereo Wrote: Anyone using a Brinkmann EMT and if so what settings do you use? The EMT Ti output is 21mV and recommended load is 600 Ohms.
Hi,
The Brinkmann is basically an EMT TSD-15N with a different cantilever and stylus profile (I believe). The 0.21mV output is referenced to 1cm/s so it is actually 1.05mV/5cm/s (the normal value quoted by other manufacturers). I would set the values to 1100-1200uV in the configurator. Try the 460 Ohms impedance first, this should be fine as most moving coils like to 'see' 10x the internal DC resistance (EMT = 24Ohms) so as long as you've got more than 200 Ohms you should be OK (Even 100 Ohms should be fine as RoKsan always recommended 100 Ohms for the Shiraz which also had the same EMT generator). Try 100 -> high and see what you like the sound of.
I've always loved EMT's.
Dave
