26-Apr-2016, 09:38
They will also tell you if you ask that that their volume control is totally transparent and that their amps will sound as good at low levels as at high ones.
Have not played around with the output settings myself as mentioned but other here have reported that when reducing the max output they have to increase the volume to get the same loudness. This is a very clear indication to me that they reduce the gain of their amps which in turn means less digital attentuation for a given volume. Sometimes you have to take manufacturer info with a grain of salt!
Have not played around with the output settings myself as mentioned but other here have reported that when reducing the max output they have to increase the volume to get the same loudness. This is a very clear indication to me that they reduce the gain of their amps which in turn means less digital attentuation for a given volume. Sometimes you have to take manufacturer info with a grain of salt!
Highly modded avantgarde omega duos, slightly modded d200, d-sonics m3 800 s class d amp to drive the subs of my duos, all equipment on silent running audio platforms.
DCS Network bridge connected with AQ diamond to Router and with special Belden 1694a digital cable (cable is cryoed, mechanical damped and using very high quality solder to KLEI Harmony Bullet plug)
S/C is Shunyata biwire Delta, 2 Delta p/c on the bridge and bass amp, Synergestic dev p/c on the 200, all connected to Shunyata Denali power conditioner
DCS Network bridge connected with AQ diamond to Router and with special Belden 1694a digital cable (cable is cryoed, mechanical damped and using very high quality solder to KLEI Harmony Bullet plug)
S/C is Shunyata biwire Delta, 2 Delta p/c on the bridge and bass amp, Synergestic dev p/c on the 200, all connected to Shunyata Denali power conditioner
