07-Jul-2016, 15:51
(This post was last modified: 07-Jul-2016, 15:51 by road rebel.)
Using an Oppo+ vanity mod board is a good start. However this solution is not one you could sell as is to Devialet customers.
The problem of multiple spdifs is not new, the way it was solved almost 10years ago: http://www.switch-box.com/S_PDIF_install...-11SA.html. You can also tap the i2S lines and clock on an Octava 4x2 7.1 matrix to achieve an equivalent result.
With a miniDSP nanoAVR you have a cheap alternative to remap the LFE and then you don't need the sillica Uno.
However what we need is a good multichannel/multizone streaming protocol. Or does it exists already? ;-)
The problem of multiple spdifs is not new, the way it was solved almost 10years ago: http://www.switch-box.com/S_PDIF_install...-11SA.html. You can also tap the i2S lines and clock on an Octava 4x2 7.1 matrix to achieve an equivalent result.
With a miniDSP nanoAVR you have a cheap alternative to remap the LFE and then you don't need the sillica Uno.
However what we need is a good multichannel/multizone streaming protocol. Or does it exists already? ;-)