17-Jul-2016, 13:45
(This post was last modified: 17-Jul-2016, 13:47 by helloworld1978.)
Display units are used in shops while the plastic sheet is still on the unit. This causes faint glue marks to form permanently on the top case of the Devialet. Due to the fact that the unit gets hot and the glue permanently marks the finish. Take a very bright light and shine it on top of the D200 and look if you can see faint marks. Before you do this make sure to clean the top with some isopropyl and soft cloth. If you see faint marks/discolouration then sure enough chances are it's a display unit. Devialet should do more to seal the unit properly so that it's more tamper proof.
Auralic Mini (Sbooster LPSU), Rega RP8, Melco N1A, Devialet D200, Devialet 400, ELAC BS314, ELAC BS312, Sonus Faber Olympica 1, Audioquest (Victoria, Yosemite, Vodka Cat7, Carbon USB) Chord Epic Master/Companion link, Wireworld Oasis 7 speaker cable, Inakustik Reference LS-803 speaker cable,Isotek premium mains cables, TCI mains cables, Atlas mains unfiltered distribution block, Supra filtered mains distribution block, and synergistic research (red/black fuse,sort kone), and vertexaq (silver-jaya).
