Room correction

[Music or sound]

I'm hoping to test a Trinnov Amethyst in my setup soon so will report back on its room correction capabilities (which are supposed to be best in class). As it is a UPnP streamer/renderer (among a million other things!) I will be able to feed it directly into the Devialet.

For those that aren't familiar with the Amethyst see this:

http://www.hifiplus.com/articles/trinnov...st-preamp/

I've heard some very positive reports across the Channel of others using the Amethyst with a Devialet. It's certainly got me very curious indeed!   

Guillaume

Hi Guillaume

If you need help, I will be very happy to participate. I own an Amethyst and a ST2-H. I have setup several systems with Trinnov products.
There are some (very easy) modifications to make on the default options. As the max + correction which can produce digital distorsion as a lot of albums do not respect the -6dB headroom.

The phase and the impulse response corrections are the most impressive. To my knowledge, they do not exist on any other correction system.The keypoint of Trinnov is their four microphones measurement device which allows timings and reflections measurements on 360°  

Passive treatment remains mandatory. No correction is possible for flutter echos or nodes.
But passive treatment cannot do anything on phase and impulse response which have dramatic effects.

For connection on Devialet, my advice is to use a digital AES outout on the Amethyst, and use the Amethyst  as a digital upnp drive, not using its analog outputs (very very good DAC by the way, and preamplifier). As a digital drive, it is at the same "quality level" as d1-server or Bel Canto Refstream. 

Other reviews:
http://www.6moons.com/audioreviews2/trinnov/1.html
And in french (same reviewer) http://www.audiophile-magazine.com/bancs...-amethyst/

For all network connected audio products, I strongly recommand an "optical bridge" ( about 100€) that is currently the most efficient way (and also the cheapestest one) to get rid of all electrical pollution of computers, switches, etc , ahead the audio, and that go through RJ45 cable. 
If you are interested, open a thread about it, I will provide all needed information.

Cheers

The Trinnov Amethyst is apparently much more sophisticated than Devialet. I am especially impressed by its cross-over implementation relative to Devialet (which I use). Also the acoustic room mapping (including its tetrahedral measurement microphone array) is very impressive.
I am still convinced no matter how advanced, correcting loudspeaker output can never correct room acoustics. Room acoustics is a 3d reality and one can correct for one single point in that room. But the room mapping function would also allow to optimize speaker and listening position by non electronic means (also helpful with the placement of musical instruments).