Photo of attachment 'lock' on Tree or Gecko?

[MountainGuy]

Would anyone be kind enough to provide a close up photo of the attachment 'lock' (for lack of a better word) on either the Tree or the Gecko to the Phantom's little metal bolt in the center of the base?  I am considering making a custom base for the Phantom and will share here if I do. 

Thanks!

[ragwo]

Not exactly what you are looking for, but it's a solution that works well. 
EvPa's creation:
   
http://devialetchat.com/showthread.php?t...0#pid50410

[ASH1976]

Would anyone be kind enough to provide a close up photo of the attachment 'lock' (for lack of a better word) on either the Tree or the Gecko to the Phantom's little metal bolt in the center of the base?  I am considering making a custom base for the Phantom and will share here if I do. 

Thanks!

Dont have the exact pic of the locking design of the Tree, but i made 2 stainless steel clamps on my base for fitting.   Its not accurate but wouldnt allow the Phantom to be toppled off !!!  if you need the design, let me know!!!!

[Jamington2004]

Would anyone be kind enough to provide a close up photo of the attachment 'lock' (for lack of a better word) on either the Tree or the Gecko to the Phantom's little metal bolt in the center of the base?  I am considering making a custom base for the Phantom and will share here if I do. 

Thanks!

Just been to Harrods and took this for you of the gecko plate 

Looks like a spring loaded clamp at the back and then a hole for the phantoms hook to slide into on the front

[MountainGuy]

Thank you! Much appreciated. Looks a bit more involved than I thought with the spring.

[Jamington2004]

Thank you!  Much appreciated.  Looks a bit more involved than I thought with the spring.

I think probably the spring is superfluous - especially if you have it angled down in anyway the weight will be towards the hook mechanism so unless someone tried to rip it out with force?

[nigelb001]

Thank you!  Much appreciated.  Looks a bit more involved than I thought with the spring.

I think probably the spring is superfluous - especially if you have it angled down in anyway the weight will be towards the hook mechanism so unless someone tried to rip it out with force?

I have Geckos and would not like to hang my Phantoms six foot in the air without the spring mechanism. there is even a screw on the underside to lock it in place. With this mechanism it is rock solid. So essential not superfluous in my reckoning

[alandbush]

Stumbled upon the following measurements.

http://www.easylounge.com/Content/photos...1200px.jpg