28-Dec-2016, 02:48
It's important that the signal from all drivers arrive at your ear arrive at the same time! This got nothing to do with the phase of the recordings!
If your Goldmunds can be adjusted and your dealer did that 20 years ago he did that for the listening height and distance at that time. If you listen in exactly the same position and never moved the speakers in 20 years you should be fine.
Guess over the years this may have changed and alignment should be adjusted accordingly. Your Goldmunds manual should
contain a chart how to adjust alignment depending on listening distance and height. Check it out
If your Goldmunds can be adjusted and your dealer did that 20 years ago he did that for the listening height and distance at that time. If you listen in exactly the same position and never moved the speakers in 20 years you should be fine.
Guess over the years this may have changed and alignment should be adjusted accordingly. Your Goldmunds manual should
contain a chart how to adjust alignment depending on listening distance and height. Check it out
Highly modded avantgarde omega duos, slightly modded d200, d-sonics m3 800 s class d amp to drive the subs of my duos, all equipment on silent running audio platforms.
DCS Network bridge connected with AQ diamond to Router and with special Belden 1694a digital cable (cable is cryoed, mechanical damped and using very high quality solder to KLEI Harmony Bullet plug)
S/C is Shunyata biwire Delta, 2 Delta p/c on the bridge and bass amp, Synergestic dev p/c on the 200, all connected to Shunyata Denali power conditioner
DCS Network bridge connected with AQ diamond to Router and with special Belden 1694a digital cable (cable is cryoed, mechanical damped and using very high quality solder to KLEI Harmony Bullet plug)
S/C is Shunyata biwire Delta, 2 Delta p/c on the bridge and bass amp, Synergestic dev p/c on the 200, all connected to Shunyata Denali power conditioner
