Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Hum starting between -85 to -80db
#19
@Craig1512 Sorry to read about your ongoing trouble here. You say "The only way to get the level bars down to around the -100db mark and no hiss/hum/buzz was to reduce the Loading to its minimum." ...this would be like putting a short on the input. Should produce little or no noise. Did you contact Devialet support? @Soniclife has a good suggestion. Or you could maybe borrow a single 220 from your dealer to try?

EDIT: I agree with you that it's unlikely that phono inputs on both your units are faulty, but if the noise is more or less the same on both and you get the noise with MM config and cartridge connected it must be considered a possibility.
*
Devialetless!
Roon, ROCK/Audiolense XO/Music on NAS/EtherRegen/RoPieee/USPCB/ISORegen/USPCB/Sound Devices USBPre2/Tannoy GOLD 8
250 Pro CI, MicroRendu(1.4), Mutec MC-3+USB
Reply


Messages In This Thread
RE: Hum starting between -85 to -80db - by G51 - 18-Apr-2017, 12:14
RE: Hum starting between -85 to -80db - by ogs - 30-Dec-2017, 10:06
RE: Hum starting between -85 to -80db - by ogs - 05-Jan-2018, 11:38

Forum Jump:


Users browsing this thread: 3 Guest(s)