New loudspeakers & room digital correction service

[petrik]

I asked about this from Thierry and he suggested using this guide:
https://www.minidsp.com/applications/aco...p-with-rew

He also gave following instructions to me:

"From a practical point of view I suggest to follow this procedure:
- set the microphone at the sweet spot position
- set the level using the left loudpseaker
- perform the sweep measurement for this position & left loudspeaker and rename it L1
- perform measurement for this position but right loudspeaker this time, rename it R1
- move microphone to the next position & perform the measurements for right then left loudspeaker, name it R2 & L2
- repeat the procedure for the others different positions (I recommend sweet spot + 4 others as a minimum)
- save the bundle of measurements as a .mdat file"

I hope this helps.