02-Mar-2018, 04:44
I am using four Phantom Gold.
4 phantoms gold / OPPO 205 /
AD converter (about 12 us dollor) * 2
The specification is 24bit 96khz but there is no way to check.
Is there any way to check the phantom input signal?
I actually heard the 7.1 system at Phantom stores and it was a very good experience.
My installation environment can not be installed 7.1.
The center speaker is also uncomfortable to install.
I saw the equipment in the store, but the lines are too complicated.
I think one of the advantages of Phantom is cleanliness without lines.
Connection diagram
oppo 205 - front sterreo analog - AD convertor - front left phantom optical input
oppo 205 - rear sterreo analog - AD converter - dialog optical input
* I did not want any connection to the rear speakers except the power supply, so all the wires were solved from the front.
oppo 205 settings
5.1 Downmix
front and rear spraker: large
center: none woofer: none
spark setting
front - livigroom - optical from left phantom
rear - kitchen - optical from dialog
All formats such as DTS HD or DOLBY ATMOS are fully functional.
So far I've seen about 10 movies and it was a good experience.
However, in 6-7 movies, jitter noise occurred about 3-4 times during movie watching.
It is not uncomfortable to watch movies.
But I do not think this is an AD converter problem.
In the past, two phantom problems occurred during use with optical input without AD converter.
The sound that is played in the spark than the optical input is cleaner and better.
So I would like to have a dialog that supports 5.1 ... I do not think it will be done anytime soon.
To install the center speaker
Add another AD converter.
4 phantoms gold / OPPO 205 /
AD converter (about 12 us dollor) * 2
The specification is 24bit 96khz but there is no way to check.
Is there any way to check the phantom input signal?
I actually heard the 7.1 system at Phantom stores and it was a very good experience.
My installation environment can not be installed 7.1.
The center speaker is also uncomfortable to install.
I saw the equipment in the store, but the lines are too complicated.
I think one of the advantages of Phantom is cleanliness without lines.
Connection diagram
oppo 205 - front sterreo analog - AD convertor - front left phantom optical input
oppo 205 - rear sterreo analog - AD converter - dialog optical input
* I did not want any connection to the rear speakers except the power supply, so all the wires were solved from the front.
oppo 205 settings
5.1 Downmix
front and rear spraker: large
center: none woofer: none
spark setting
front - livigroom - optical from left phantom
rear - kitchen - optical from dialog
All formats such as DTS HD or DOLBY ATMOS are fully functional.
So far I've seen about 10 movies and it was a good experience.
However, in 6-7 movies, jitter noise occurred about 3-4 times during movie watching.
It is not uncomfortable to watch movies.
But I do not think this is an AD converter problem.
In the past, two phantom problems occurred during use with optical input without AD converter.
The sound that is played in the spark than the optical input is cleaner and better.
So I would like to have a dialog that supports 5.1 ... I do not think it will be done anytime soon.
To install the center speaker
Add another AD converter.
