Problems with Core Infinity

[Axel]

I know that there’s a thread dedicated to configuration problems, but as I think that my problem is caused by the CI board, I’ll post it here. 

Before I sent my Dev away for the CI upgrade, I took out the SD cards. On its return, when 
I put the cards back in, the amp defaulted to input “Digital 3” ad the pre-outs weren’t working.
I decided to do a configuration from scratch, choosing my CD/BluRay as the default input at startup, so that other members of the family just have to turn on and away you go.
When I put the newly configured cards in and turned on, the default at startup was again “Digital 3” despite there being no input with this name. The Pre-outs weren’t working either.

Anybody got any ideas as to why this should be?  All input gratefully received!

@Admin. Please feel free to move this post if you deem necessary.

Edit: I’ll try newly formatted cards. Which format does the Devialet require?

My SD cards are formatted MS-DOS (FAT16).

I noticed that the parameters in the config files which are related to the network (DHCP on/off, fixed IP address, WiFi network name and password) are not correctly interpreted by the new software. But I did not notice any other problem as far as config files are concerned.

Have you checked if the name you have given to the configuration is displayed by the Devialet when it boots ?

The Master boots with the correct name given to the configuration, but the Companion boots with Config S1, which has always been the case.