(01-Dec-2017, 22:07)iamwappie Wrote: I'm curious if the devialet remote app will stilk work or will there be a new app too?Release notes in the file:
MAIN FEATURES SUPPORTED IN THIS RELEASE
FULLY SUPPORTED
All physical inputs
Configurator
SUPPORTED IN RC VERSION
AIR
UPnP Renderer
NOT SUPPORTED IN THIS RELEASE
Airplay
Bluetooth
Spotify Connect
Should you have any question regarding this release, please contact Devialet Customer Service.
1. Guidelines
FOR THE DOS 2.1 RC + FIRMWARE 11.5.18 RELEASE
To safely update your Expert Pro with the latest rmware version and avoid any error in the process,
please only use the new SD card that is provided in the box.
2. How to update your Expert Pro
WARNING: THIS UPDATE SHOULD TAKE APPROXIMATELY 5 MINUTES TO INSTALL. YOUR EXPERT PRO MUST NEVER BE TURNED OFF DURING THE UPDATE PROCESS.
To launch the update process of your Expert Pro, please follow these steps:
After downloading the le Expert-Pro-2.1_RC4.zip, take the new SD card provided in the box of your Expert Pro, insert it in your computer and format it.
Unzip the le “Expert-Pro-2.1_RC4.zip” at the root of your SD card. You should now have 14 les on your SD card, all located in the root directory and not in any other folder.
Eject the SD card from your computer and insert it in the SD card reader at the back of your Expert Pro.
If your Expert Pro already is in standby mode, long press (5 seconds) the front button to reset your device. Else, unplug the power cable, wait 5 seconds, and plug it back in.
The update process should now start automatically. Once it is complete, the messages « Upgrade 11.5.18 successful » followed by « please press the front button » should appear on screen. If you don’t see them, please make sure that you carefully followed all the previous steps or contact our customer service. To make sure that your Expert Pro has been updated, long press on the “Tone” button of your Remote and check the rmware and DOS versions on the screen of your device.
Your Expert Pro is now up-to-date and supports the RC version of Core In nity.
3. UPnP Renderer
HOW TO USE UPNP WITH YOUR EXPERT PRO?
To control your NAS from a third-party app using UPnP, please follow the steps below:
- Setup your NAS on your local network by following the instructions provided by the manufacturer.
- Download or open your favorite UPnP compatible app.
Please note that NAS manufacturers (QNAP, Synology...) usually have their own dedicated app
(PC/Mac/Smartphone). If not provided by your NAS’ manufacturer, you can still easily nd many universal UPnP compatible apps that you can download to use that feature on Expert Pro.
- Select your “Devialet Expert Pro” system as the output.
- You can now browse through all your library and play any track on your Expert Pro.
