Ethernet after CoreInfinity upgrade

[disarmamant]

Mohmm - If you select the AIR input on your amp you should see a small symbol above the dB on the circular window of your amp - this is the ethernet connection.If you don't see it try to unplug then plug the ethernet jack into the amp.If you have the ethernet symbol, then look at the settings of the AIR app on your toolbar, it should show 'My Devialet Eth' as an option.Select the option if you can, try to play.

If there is no My Devialet Eth option, or the AIR app symbol on your toolbar is greyed-out, then select quit from the app drop-down menu and re-install the app.

Select AIR as the input on your Devialet.If the app appears on your toolbar in black and My Devialet Eth can be selected, then it should work.

Thanks for this. The problem is that the present implementation of the Devialet OS obviously does not allow a direct dedicated ethernet cable between computer (if you have two outputs on your computer, the other for your internet access) and the Dev unit. It seems, it always needs access to a router. Once connected to a switch, ethernet works fine again.

WLAN also is very good after the upgrade.

Thanks Devialet.

Have you tried an Ethernet cross over cable?


Sent from my iPad using Tapatalk