(11-Mar-2018, 02:06)Jerry Seh Wrote:(11-Mar-2018, 00:13)Blackmorec Wrote:Hi Blackmorec,(10-Mar-2018, 22:34)Jerry Seh Wrote: My joy turned to a total disappointment!
Well, the OdA were returned, CI upgraded and both chassis & remote polished to a shine as good as new.
However, when the SD cards were redone - addition of a new tuner and a complete modded Oppo UDP-205 from Modwright, the right channel (S1) inputs has no sound at all, no matter the input - which in this case were my Stereo TT input, FM Tuner.
Tried re-doing the configurator like more than 10x (yes, 10x) the problem could not be resolved. When switching input from the Main to the S1 unit, that is the FM exchanging with Oppo, there is sound. This is also true when switching phono input to Mono from Stereo.
In the end, I am left with a pair of OdA that don't seem to work at all if using inputs from the right (S1). The last suspect is that connecting (smaller jack cable) could be "damaged". Dealer will try again on Mon with a new cable, and I certainly hope it will work.
Anyone knows how to fix this as I don't think its there cable at fault. But being a novice, the only thing I culled do is wait and full of frustration. I hope someone is able to advise how I should proceed cause I am now left with a system I cannot use at all on one channel inputs.
Just some obvious stuff.....Have you reloaded firmware/software latest versions as well as redoing your config? Deleted all the old files from the SD card before copying the new files?
Are the speakers plugged in correctly following dual mono config rather than L and R labels on the amps?
Thanks for the response.
Yes, all the SD cards have been reformatted and reloaded with the latest Firmware/Software that can be used for CI updated models.
The speakers are plugged in correctly .... but I am NOT sure about the DUAL MONO Config, rather than the L and R labels on the amp. Can you elaborate more on this so I can pass this information to the dealer who will be coming back on Monday to help solve the issue.
Once again, thanks for the advise. I look forward to your reply as this will definitely help educate the dealer how to set this right.
Best Regards,
Jerry Seh
@Jerry Seh
The correct connection of the speaker cables is counter intuitive, but if you look at the Configurator, it’s shows which terminals to use. Both amps should be set to mono as is the default.
Project Eperience X Pack with Ortofon Rondo Red MC, Oppo BDP 105D, 2 x Sonos Connect, QNAP HS251+ NAS with 2 X 6TB Western Digital Red, Mac 5K 32GB running Lifetime Roon, iPad Pro 12.9" for remote control. Etalon Ethernet Isolator, Devialet 440 Pro CI, Sonus faber Olympica ll with Isoacoustics Gaia ll feet, Auralic Taurus Mkll headphone amp., Denon AH-D5000, Sennheiser HD600 and HD800 with Cardas cable, Van Den Hul The First Ultimate and Crystal interconnects, Furutech power cables, GSP Audio Spatia speaker cable.
South Coast England
