13-Jul-2018, 14:34
(13-Jul-2018, 10:07)ragwo Wrote:The Phantom Remote Control software is available on the App Store. Only useful if you use iOS/OS X though.(12-Jul-2018, 22:15)Hifi_swlon Wrote: Posting here one of the Questions @thumb5 put to Devialet senior Expert team at the Oxford Audio event today. It may or may not be helpful in this case.Thanks a lot! Just contacted Devialet to see if they will provide the software and firmware.
Quote:11) Is it possible to have a switch in Spark that selects "normal", "zero latency" or "time-coincident" for Phantom?
A: There is a Direct Optical Mode with very low latency, but no control over volume as the operating software is bypassed - the Phantom just plays what it gets in optical input.
Joachim showed me the following procedure to engage this mode:
1: launch Phantom app (not Spark)
2: restart Phantom (3 clicks)
3: pair Phantom with app
4: on app, tap ten times between “mute” and “night” icons
5: select Optical Direct mode
6: select channel (L/R/mix)
7: select max. output level 0dB/-12dB
[Disclaimer: since I'm not familiar with Phantom I can't guarantee this is exactly correct - please take care, and contact Devialet if in any doubt.]
Project Eperience X Pack with Ortofon Rondo Red MC, Oppo BDP 105D, 2 x Sonos Connect, QNAP HS251+ NAS with 2 X 6TB Western Digital Red, Mac 5K 32GB running Lifetime Roon, iPad Pro 12.9" for remote control. Etalon Ethernet Isolator, Devialet 440 Pro CI, Sonus faber Olympica ll with Isoacoustics Gaia ll feet, Auralic Taurus Mkll headphone amp., Denon AH-D5000, Sennheiser HD600 and HD800 with Cardas cable, Van Den Hul The First Ultimate and Crystal interconnects, Furutech power cables, GSP Audio Spatia speaker cable.
South Coast England
