@zoran-pavlovic.
I will try to answer as completely.
Since the Z3 was released in Europe, I have had several AQ cables at home for a long time. At that time with a somewhat better power strip.
First from a furutech gold and later furutech gold NCF wall socket.
When the Monsoon and Blizzard came out, I bought them all twice or more to be able to try them out here at home for a longer period of time.
The experiences were already that the more expensive in my installation was not always the better.
The moment the Niagara 1200 and the powerquest 3 were released in Europe, I immediately bought them.
The powerquest3 for modem and router.
The niagara 1200 for my music system.
From that moment until now I'm about settled.
To me it sounds best like this:
Blizzard from wall socket to Niagara.
From niagara 1200 with Z2 to TV, with Monsoon to Farad super 3 > Etherregen. and with two Z3's to my phantom golds.
A powercable is already attached to the powerquest 3, which is comparable to the monsoon. from that powerquest 3 i go with monsoons to 2x farad super3 to modem and router.
Recently tried everything out again and come to the following for me:
From wall contact door to niagarara 1200 the best choice is the blizard, followed by the monsoon and finally the Z3.
From the filtered connections on the Niagara 1200 to the Farad super 3 > etherregen, the Monsoon sounds the best, then the Z3 and the blizzard the least.
from the filtered connections on the niagara 1200 to my devialet phantom golds the Z3's sound the best, followed by the monsoons and really the least the Blizzards. (strange, but really in my situation ;-)
from the powerquest 3 i go to 2x farads super3 to modem and router, the Monsoons sounds here the best.
I have put a lot of time and costs into trying it out, but of course this can work out differently at your home. Power is and will remain difficult.
It should also be noted that the power from the meter cupboard to the wall socket now looks like this:
Gigawatt G-C16A circuit breaker in meter cupboard and gigawatt wall socket G-044 with my installation.
See: https://www.hifi-advice.com/blog/review/...tt-part-1/
I have also successfully using 3 pieces of furutech NCF clear line- AC power suplly optimizer.
It should also be noted that both the Niagara 1200 and 3000 do not have power-limiting outlets.
It is important, as Audioquest also puts in its manual, is that you have to expirimate what is the best outlet for the device in question. That can also give quite a difference in SQ.
It should also be noted that i have a separate and good earthing system in use and have made all devices and connections in such a way that earth loops are not possible.
hope it helps you?
Sorry for my englisch.
I will try to answer as completely.
Since the Z3 was released in Europe, I have had several AQ cables at home for a long time. At that time with a somewhat better power strip.
First from a furutech gold and later furutech gold NCF wall socket.
When the Monsoon and Blizzard came out, I bought them all twice or more to be able to try them out here at home for a longer period of time.
The experiences were already that the more expensive in my installation was not always the better.
The moment the Niagara 1200 and the powerquest 3 were released in Europe, I immediately bought them.
The powerquest3 for modem and router.
The niagara 1200 for my music system.
From that moment until now I'm about settled.
To me it sounds best like this:
Blizzard from wall socket to Niagara.
From niagara 1200 with Z2 to TV, with Monsoon to Farad super 3 > Etherregen. and with two Z3's to my phantom golds.
A powercable is already attached to the powerquest 3, which is comparable to the monsoon. from that powerquest 3 i go with monsoons to 2x farad super3 to modem and router.
Recently tried everything out again and come to the following for me:
From wall contact door to niagarara 1200 the best choice is the blizard, followed by the monsoon and finally the Z3.
From the filtered connections on the Niagara 1200 to the Farad super 3 > etherregen, the Monsoon sounds the best, then the Z3 and the blizzard the least.
from the filtered connections on the niagara 1200 to my devialet phantom golds the Z3's sound the best, followed by the monsoons and really the least the Blizzards. (strange, but really in my situation ;-)
from the powerquest 3 i go to 2x farads super3 to modem and router, the Monsoons sounds here the best.
I have put a lot of time and costs into trying it out, but of course this can work out differently at your home. Power is and will remain difficult.
It should also be noted that the power from the meter cupboard to the wall socket now looks like this:
Gigawatt G-C16A circuit breaker in meter cupboard and gigawatt wall socket G-044 with my installation.
See: https://www.hifi-advice.com/blog/review/...tt-part-1/
I have also successfully using 3 pieces of furutech NCF clear line- AC power suplly optimizer.
It should also be noted that both the Niagara 1200 and 3000 do not have power-limiting outlets.
It is important, as Audioquest also puts in its manual, is that you have to expirimate what is the best outlet for the device in question. That can also give quite a difference in SQ.
It should also be noted that i have a separate and good earthing system in use and have made all devices and connections in such a way that earth loops are not possible.
hope it helps you?
Sorry for my englisch.
