11-Nov-2018, 20:08
I found the mistake from ground wire. It was broken from the amplifier end. Fixed it but it didn't effect on the hiss with Dynavector. Need to try Soundsmith some day.
Actually after I fixed the ground wire I got buzz also with Dynavector. When I did remove the ground wire then only hiss. I needed to re-route all the cables to get rid of the buzz when ground wire is connected.
Actually after I fixed the ground wire I got buzz also with Dynavector. When I did remove the ground wire then only hiss. I needed to re-route all the cables to get rid of the buzz when ground wire is connected.
