02-Feb-2019, 19:01
(02-Feb-2019, 18:28)flyingcloudisle Wrote: I have 4 Phantoms that I had connected through my UBNT Unifi Switch/Network.
Until recently everything was working great. But then there was a recent upgrade to my UBNT Unifi network and now my Spark App cannot identify the Dialog on the network. I have tried getting support from Devialet and UBNT Unifi but they have not been able to resolve my situation.
I have tried a new Dialog and it didn't help.
I then setup a new network using a new devices from "Amplifi" and I was able to get it to work. So the issue has been isolated to my Unifi Network (I believe).
I have seen a lot of good networking discussions on this forum and am hoping I can get some help.
I had a similar problem recently. After thorough troubleshooting, I found the problem with the faulty voltage adapter of the switch. Test if your switch is still working.
Remote >> 2x Silver Phantoms << Eth << Dialog UPNP << JRiver MediaCenter 24 - Ubuntu 18.04 x64 [VMWare] << File server - Windows 10 x64 [Supermicro X11SSH-LN4F, Xeon E3-1425 v5, 46 Tb, 16Gb DDR4 ECC] * Spark is only used to update firmware *