Raidho C1.2 Issue with D250

[cyberkank]

I had similar issues with my devialet 800 driving magico. With SAM turned on, it will sometimes stop or go out of phase. After ongoing investigation with devialet ( had some good responses from their team) it turns out that the cause was the impedance dip of the magico ( it can go down to effectively 0.5 ohm) which causes the devialet to stop or pause signal temporarily to prevent speaker damage. I solved the problem by adding a pair of super tweeter. This essentially changed the loading profile of the speaker and everything is fine now. You can see if it is the same cause for the raidho.

Sent from my SM-N9600 using Tapatalk