UK event with Mathieu Pernot - 17 July

[daniel.avasilichioaei]

Questions for Mathieu from the forum, in no particular order:

1) What's the current status of investigating/fixing the problems with Roon (RAAT) over Gb Ethernet?

2) What's the current status of investigating/fixing the problems (with the configurator?) that can cause high-volume distortion when SAM is enabled?

3) What's the schedule for completing full internally-hosted configuration (this was said to be on the schedule last summer, next priority after Roon Ready support)?

4) It would be very helpful to have a digital "effects loop" i.e. digital output from the selected input, looped through a digital processor to digital input to the ADH section.  For example this would allow room correction by external hardware, in the absence of RC done by the Expert's DSP.  Please comment on the possibility of implementing that.

5) Apart from AXD, what other new capabilities/uses are planned for the Expert Pro's DSP?

6) What plans are there to support MQA directly in the Expert?

7) Please confirm the R/C loading for both MM and MC cartridges in the 120 and 130 (not advanced) phono stage.

8) What's the status of an updated Devialet app (iphone, android, etc...) that provides all the display and full functionality of the Remote?

If I've missed anything or there are any "late entries", please let me know and I'll edit this post accordingly to try and keep it all in one place.

Thanks!

Additional questions, very embaressing / big sound quality issues:
- Bug on FIRMWARE 13.1.3 DOS 2.2.4: while increasing the TONE \ BASS setting with SAM = ON, starting with very low values (a few dB plus), amplifier is clipping bass, and sound is getting very heavy distortions. Please see https://devialetchat.com/Thread-Bug-for-...-DOS-2-2-4.
- Configurator bug on dual mono configurations (at least) for BALANCE MODE, BASS and TREBLE boost/cut frequency: multiple settings form configurator "General settings" section (including "Balance mode", and "Bass" and "Treble" frequencies) are not saved inside companion configuration file, but only inside master configuration file. Master unit is playing as per user's settings, and companion unit is playing as per default values. Please see https://devialetchat.com/Thread-Bug-for-...-dual-mono.

Thank you, your help is very appreciated!