"dp_cfg.txt" Library

[IanG-UK]

I've done lots of 800 dual mono configs to support 5 different speakers with or without a subwoofer; plus one active speaker I thought about; plus 2 SAM speakers; plus electrostatic headphones; with quite a few inputs.

The dual mono configurator with the RCA/XLR link doesn't currently work without using a workaround; plus (though probably not a config issue) I get white noise on both wifi and ethernet fed from a MacBook Pro.

1 Transducers

(a) passive loudspeakers
(i) Magico Q1: 46Hz - 25kHz @+-3db and 39Hz @-6dB
(ii) KEF LS50: 79Hz - 28kHz @+-3dB and 47Hz @-6dB
(iii) CML Etude: not disclosed
(iv) Boenicke W5: not disclosed
(v) Rogers LS3/5a: 68Hz - 20kHz @+-3dB and 55Hz @-6dB

(b) active loudspeakers
(i) Pluto Ultimate: 40Hz - 16kHz @+-3dB and 32Hz @-6dB

© active subwoofer via amplifier
(i) Wilson Benesch Torus: 10Hz - 150Hz @not disclosed and 18Hz @-6dB

(d) SAM loudspeakers
(i) Magico Q1: 16Hz @-6dB
(ii) KEF LS50: 29Hz @-6dB

(e) electrostatic headphones via amplifier
(i) Stax SR009

2 Configurations/Crossovers to deploy

1 Q1 or LS50 with Torus; or alone
(a)(i) or (a)(ii) plus ©(i): 4th order high pass and low pass 45Hz/55Hz;
or (a)(i) or (a)(ii) alone with no filtering

2 Etude or W5 or LS3/5a with Torus; or alone
(a)(iii) or (a)(iv) or (a)(v) plus ©(i): 4th order high pass and low pass 60Hz/75Hz
or (a)(iii) or (a)(iv) or (a)(v) alone with no filtering

3 Pluto with Torus; or alone
(b)(i) plus ©(i): 4th order high pass and low pass 30Hz/35Hz
or (b)(i) alone with no filtering

4 SAM Q1 with Torus; or alone
(d)(i) plus ©(i): low pass 30Hz
or (d)(i) alone with no filtering

5 SAM LS50 with Torus; or alone
(d)(ii) plus ©(i): low pass 30Hz
or (d)(ii) alone with no filtering

6 Q1 or LS50 or Etude or W5 or LS3/5a; or headphones
(e) plus any (a): passive loudspeaker plus electrostatic headphones

7 SAM Q1 alone simplified
(d)(i) alone with no filtering

4 Common settings - changes from default
1 - advanced configurator
2 - device = 800
3 - description = custom (NO LONGER DEFINABLE)
4 - chaining settings = chaining input, not shared sources
5 - chaining link = aes/ebu slave
6 - sub on slave = pre-out stereo
7 - general settings, remote: button 2 = pre-out; remote count = 2
CANNOT DO STEP 7: REMOVE COMPANION, ADD 250, GO TO STEP 4
8 - aes/ebu name = CYRUS CD
9 - line 1 name = QUAD TUNER; max level = 1.0Vrms
10 - optical1 name = PURE RADIO
11 - optical 2 name = MACBOOK PRO DSP
12 - usb name = DSPEAKER
13 - ethernet name = MACBOOK PRO(E)
14 - wifi name = MACBOOK PRO(A); password = xxxxxxxxx
15 - digital 2 = disabled
16 - phono 2 = disabled

Anyone wanting any one of these just ask. Again the wifi is based on my network name and password.