Phantom Premiere and Dante

[mingfang]

@mingfang That's great news!  Now its time to convince the wife we need an audio upgrade.  Wish me luck! :-)

@njaiswal
Good luck.

Also I googled and found next to no info on the Custom so I figure I share what I know here.
With Ethernet and power plugged in, the power button/light combo will light up for a few minutes and then go off.
It appears the power button doesn't actually do anything; Pressing and holding the button seems to have no effect.

Using DHCP it will result in two IP addresses. One for Dante and another for the web interface.
You can use the Dante Controller to figure out which one is Dante.
Dante Controller app also runs Dante Updater to automatically update the Custom's Dante firmware.

The other IP has the web configuration screen.
It looks like the regular web interface but with fewer tabs.
The Custom does not have Wifi and will not function as a "smart" speaker(no Airplay, bluetooth, toslink, etc).

My configuration is:

Max dB SPL: 96
Channel mix: Mono Mix
Startup source: Dante
Current source: Dante
Startup volume: 85
Current volume: 85

With this volume, Direc calibration will set the Reactor Custom at 0db and my two Silvers to -6db.

Hope this helps.