(23-Jul-2019, 13:29)Snoopy8 Wrote:(22-Jul-2019, 18:00)njaiswal Wrote: I spent this weekend totally reconfiguring my phantoms to use Dante as the audio input. I was able to work with a local custom installer and purchase 5 Dante optical adapters (https://www.audinate.com/products/dante-...er?lang=en) and 3 AVIO adapters (https://www.audinate.com/products/device...naloginput). I'm fortunate that my preamp has balanced outputs and am using it to control sources and volume on the phantoms.
What other Dante components are required to make it work? Do you have a simple diagram of your setup?
I also used Dante Controller which is free from Audinate to route the audio signal to the phantomes. I've attached a crude diagram of my setup.
(22-Jul-2019, 18:00)njaiswal Wrote: I'm simply blown away at the improved sound quality I was able to achieve with this configuration than my old one (using parts ordered from Amazon). The phantoms sound "huge" again. Everything just sounds better.
How does it sound compared with Spark App?
IMHO it sounds much better because I'm able to use Anthem's audio room correction software to eliminate standing waves generated by the phantoms.
6 x Phantom Gold, 3 x Phantom Silver, 2 x Phantom Classic, 9 x Phantom Reactor 900, Symetrix Radius AEC-2, 2 x JBL Synthesis SDP-55, Dante
