23-May-2022, 23:51
Hi @DAVEDWACK
I've only had issues with the iPhone app when the amp itself wasn't connected to my wifi network. Check for the symbol in the window, and see if there is a line through it. Even with the correct network and password I had issues, and restarting the amp solved the problem. Unplug, wait 30 seconds and plug it in again. A simple on-off might not do it.
I did check the settings in the configuration file, and it was correct. For some reason the amp never quite got onto the bus with the rest of the system. So complete brain-cleanse with no power for a minute might smarten it up.
The app is sluggish, but I've had it work reliably for a long time now.
I've only had issues with the iPhone app when the amp itself wasn't connected to my wifi network. Check for the symbol in the window, and see if there is a line through it. Even with the correct network and password I had issues, and restarting the amp solved the problem. Unplug, wait 30 seconds and plug it in again. A simple on-off might not do it.
I did check the settings in the configuration file, and it was correct. For some reason the amp never quite got onto the bus with the rest of the system. So complete brain-cleanse with no power for a minute might smarten it up.
The app is sluggish, but I've had it work reliably for a long time now.
Damon
Powernode, NAD M32, Cambridge CD transport, Analysis Plus, Nordost, iFi Nova, CSS Criton 1TDX, KEF C62
Vancouver, Canada
