28-Sep-2020, 14:03
take this analogy, with out the mains you can't hear anything,no matter what you spent on the kit you use.
Now for those in the know, put the mains through some good measuring equipment an oscilloscope and first measure the incoming voltage to your premises, then again at the point you plug your system in, in the first case is the voltage within the regulations for the supply, 2nd does the voltage differ at the socket, and by what margin.Then with the system plugged in playing as you would normally, take the volt readings again. If a significant volt drop occurs at either you need a competent electrician to check your home installation for cables sizes lengths, resistance/impedance testing, then correct load testing.
You may find if it's external then they could supply a larger csa infeed or adjust their transformer tappings to a line the voltage/load on it.
Now for those in the know, put the mains through some good measuring equipment an oscilloscope and first measure the incoming voltage to your premises, then again at the point you plug your system in, in the first case is the voltage within the regulations for the supply, 2nd does the voltage differ at the socket, and by what margin.Then with the system plugged in playing as you would normally, take the volt readings again. If a significant volt drop occurs at either you need a competent electrician to check your home installation for cables sizes lengths, resistance/impedance testing, then correct load testing.
You may find if it's external then they could supply a larger csa infeed or adjust their transformer tappings to a line the voltage/load on it.
TOYS:- Devialet 400, PS Audio Perfectwave Transport, Melco N1A, Boenicke W8's, cabled throughout Chord Signature tuned aray. Intel I7 NUC Roon Rock/Tidal.
Mains supply, dedicated consumer unit, 5Kw balanced transformer,
. plenty of IFI accessories, Melco Ethernet cables, Townshend isolation throughout, All furutech mains cables.
Recently added. PS Audio PP5, Townshend Audio 5 tier Seismic table.SBooster psu for NUC,
Mains supply, dedicated consumer unit, 5Kw balanced transformer,
. plenty of IFI accessories, Melco Ethernet cables, Townshend isolation throughout, All furutech mains cables.
Recently added. PS Audio PP5, Townshend Audio 5 tier Seismic table.SBooster psu for NUC,
