Magicos are sealed and C60s are vented speakers, so it could make a difference in SAM profiles for these two speakers. Besides, the differences in measurements made by @jvoki with SAM 0% and SAM OFF are below 25 Hz - maybe some of them are 'masked" on C60s in my room, because I have pretty strong room modes around 20-22 Hz combined with room gain and also vented speakers, even quite large, hardly have any response below 20Hz - BR is always tuned higher.
I wish I could repeat my measurements (I should also order UMIK-1 and switch from XTZ Room Analyzer to REW), but I don't have C60s any more and my current speakers don't have SAM profile.
BTW, I don't like what SAM 0% is doing to Magicos - it behaves like 24 dB/oct high-pass filter. It is below 25 Hz - but why would anyone want that? If you want subsonic filter - then you use subsonic filter. Or you explicitly turn on high-pass filter in Devialet configurator. Even with SAM 50% there is some "filtering" - according to measurements posted by @jvoki.
I wish I could repeat my measurements (I should also order UMIK-1 and switch from XTZ Room Analyzer to REW), but I don't have C60s any more and my current speakers don't have SAM profile.
BTW, I don't like what SAM 0% is doing to Magicos - it behaves like 24 dB/oct high-pass filter. It is below 25 Hz - but why would anyone want that? If you want subsonic filter - then you use subsonic filter. Or you explicitly turn on high-pass filter in Devialet configurator. Even with SAM 50% there is some "filtering" - according to measurements posted by @jvoki.
Devialet Expert 440 Pro | Dynaudio Confidence 50 | 2x SVS SB16-Ultra
Anthem MRX 720 | Dynaudio Excite X28 | Dynaudio Emit M20
LG OLED 77 CX | LG OLED 65 C7
Anthem MRX 720 | Dynaudio Excite X28 | Dynaudio Emit M20
LG OLED 77 CX | LG OLED 65 C7
