Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Kef LS50 & Dynaudio C1
#14
(03-Mar-2015, 14:38)Confused Wrote:
(03-Mar-2015, 10:51)Rodney Gold Wrote: I then used the miniDSP to "shape" the bass to integrate it and to taste (flat bass at sitting position is not ok , it needs a lift , if you eq flat , you will have no bass..)
This comment interested me.  When I last checked the frequency response in my room with room correction software, it indicated a bass "hump" in the sub 100hz range.  To me it sounds fine!  Although on paper, it would suggest I need some room conditioning, bass traps etc.  Perhaps I shouldn't worry to much!

I know Rodney is a specialist in room equalisation and has posted about it on several forums.
I have a different belief and experience. 
I am a believer in one's ears ability to sort most of the bass problems out inside your head.
If the walls are hard and echo-y it just sounds bad, but IMHO, as long as you are prepared to do a bit of speaker position optimisation the bass humps can be maintained below a level that our automatic psycho-acoustic selves compensate for. We automatically "know" that bass will be uneven in a room because a lifetime of listening to people talking and music playing in rooms has been imprinted in our subconscious.
I have a DSPeaker 2.0 and have tried using it in my room and I do not hear its "correction" as an improvement.
If my daughter plays her cello in here I am sure the room effect is exactly the same as with the hifi, but it still sounds like her cello to me.
A lot of music is played in this room, both on the hifi and live instruments.
I haven't switched my DSDeaker 2.0 on for months...
Devialet Original d'Atelier 44 Core, Job Pre/225, Goldmund PH2, Goldmund Reference/T3f /Ortofon A90, Goldmund Mimesis 36+ & Chord Blu, iMac/Air, Lynx Theta, Tune Audio Anima, Goldmund Epilog 1&2, REL Studio. Dialog, Silver Phantoms, Branch stands, copper cables (mainly).
Oxfordshire

Reply


Messages In This Thread
Kef LS50 & Dynaudio C1 - by ARL67 - 24-Feb-2015, 04:06
RE: Kef LS50 & Dynaudio C1 - by Pim - 24-Feb-2015, 05:09
RE: Kef LS50 & Dynaudio C1 - by andrewd - 24-Feb-2015, 05:29
RE: Kef LS50 & Dynaudio C1 - by Pim - 24-Feb-2015, 12:45
RE: Kef LS50 & Dynaudio C1 - by Spindrift - 25-Feb-2015, 19:20
RE: Kef LS50 & Dynaudio C1 - by ARL67 - 26-Feb-2015, 01:59
RE: Kef LS50 & Dynaudio C1 - by Pim - 26-Feb-2015, 08:21
RE: Kef LS50 & Dynaudio C1 - by ARL67 - 02-Mar-2015, 15:01
RE: Kef LS50 & Dynaudio C1 - by Pim - 03-Mar-2015, 00:35
RE: Kef LS50 & Dynaudio C1 - by Rodney Gold - 03-Mar-2015, 10:51
RE: Kef LS50 & Dynaudio C1 - by Pim - 03-Mar-2015, 14:13
RE: Kef LS50 & Dynaudio C1 - by Confused - 03-Mar-2015, 14:38
RE: Kef LS50 & Dynaudio C1 - by f1eng - 03-Mar-2015, 15:25
RE: Kef LS50 & Dynaudio C1 - by ARL67 - 03-Mar-2015, 14:12
RE: Kef LS50 & Dynaudio C1 - by Rodney Gold - 03-Mar-2015, 22:06
RE: Kef LS50 & Dynaudio C1 - by Pim - 04-Mar-2015, 00:25
RE: Kef LS50 & Dynaudio C1 - by bobertk - 11-Mar-2015, 04:15

Forum Jump:


Users browsing this thread: 1 Guest(s)