Devialet expert pro sweet room beginner's guide

[tom539]

I've done it.
Copied and pasted the EQ text file to the root directory of an SD card with already setting file copied onto it.

Done it quite a few times and every time have the message WRONG FILE contact customer service!

I'm really fed up with it already,and I'm quite handy with pc anyway.

What the he'll I'm doing wrong here???

Here is my config:

Code:

// Name for this EQ configuration
"NAME":"EQ",

// Remote indicator
// Allow for the bottom's right button to toggle between main and alternate set of EQs
// Useful in A/B tests or during fine EQ tuning
"REMOTE",

// Parameters for left channel
// Static dB gain for the left channel
"dB_GAIN_L":"-4.0",        // main gain
"dB_GAIN_L_ALT":"-4.0",        // alternate gain

// Peak/Notch filters for the left channel (main)
// syntax:"EQ_x_L":[Frequency, dB_gain, Q_factor]

"EQ_1_L":[36.0, 4.0, 9.0],
"EQ_2_L":[44.2, -12.0, 20.0],
"EQ_3_L":[52.0, -7.0, 20.0],
"EQ_4_L":[60.0, 3.0, 9.0],
"EQ_5_L":[77.0, 4.0, 8.0],
"EQ_6_L":[180.0, -5.0, 7.0],
"EQ_7_L":[1300.0, 3.0, 2.4],
"EQ_8_L":[2340.0, -4.5, 5.0],
"EQ_9_L":[3200.0, -3.0, 7.0],

"EQ_1_L_ALT":[0.0, 0.0, 0.0],
"EQ_2_L_ALT":[0.0, 0.0, 0.0],
"EQ_3_L_ALT":[0.0, 0.0, 0.0],
"EQ_4_L_ALT":[0.0, 0.0, 0.0],
"EQ_5_L_ALT":[0.0, 0.0, 0.0],
"EQ_6_L_ALT":[0.0, 0.0, 0.0],
"EQ_7_L_ALT":[0.0, 0.0, 0.0],
"EQ_8_L_ALT":[0.0, 0.0, 0.0],
"EQ_9_L_ALT":[0.0, 0.0, 0.0],

// Parameters for right channel
// Static dB gain for the right channel
"dB_GAIN_R":"-4.0",        // main gain
"dB_GAIN_R_ALT":"-4.0",        // alternate gain

// Peak/Notch filters for the right channel (main)
// syntax:"EQ_x_R":[Frequency, dB_gain, Q_factor]15    
"EQ_1_R":[35.0, 4.5, 10.0],
"EQ_2_R":[43.0, -3.0, 12.0],
"EQ_3_R":[46.0, -14.0, 15.0],
"EQ_4_R":[50.0, -4.0, 12.0],
"EQ_5_R":[57.0, 5.0, 10.0],
"EQ_6_R":[78.0, 3.0, 5.0],
"EQ_7_R":[150.0, -7.0, 4.0],
"EQ_8_R":[1300.0, 3.0, 3.5],
"EQ_9_R":[2300.0, -4.0, 5.0],


"EQ_1_R_ALT":[0.0, 0.0, 0.0],
"EQ_2_R_ALT":[0.0, 0.0, 0.0],
"EQ_3_R_ALT":[0.0, 0.0, 0.0],
"EQ_4_R_ALT":[0.0, 0.0, 0.0],
"EQ_5_R_ALT":[0.0, 0.0, 0.0],
"EQ_6_R_ALT":[0.0, 0.0, 0.0],
"EQ_7_R_ALT":[0.0, 0.0, 0.0],
"EQ_8_R_ALT":[0.0, 0.0, 0.0],
"EQ_9_R_ALT":[0.0, 0.0, 0.0],

Please notice:
- default / main-config is with correction, "alternative"-config is without correction
- with default-settings for the remote, the right button will switch the EQ-settings, the tone-menu is on long-press on middle-button
- EQ only works for speaker-output, not for PRE-out
- if you are using SAM, only EQ 1-4 (or 1-5, i´m not sure) will work - other EQ-filters will be ignored

Hope, this will help...

atb, Tom