Updating to 1000 Pro

[hardcore]

I’d be interested to see what difference lifting the ground pin on the RCA-XLR cable between my 440s would make to the sound. Do you desolder the pin? Am I right in thinking that Ground is pin 1?
Any tips would be greatly appreciated.

Hi Axel, in summary, I've tried 2 ways:

1. You can buy an XLR ground lift adapter, cheap and effective.

https://devialetchat.com/Thread-XLR-AES-...xperiments

2. If you use an RCA->XLR adapter at the source (Master) end, you can cut the ground pin cable there.

https://devialetchat.com/Thread-SPDIF-Cr...#pid102461

I suggest you try a non-permanent way first to see if it works without issue in your system. Test with high sample rate sources like 192KHz and DSD to check if there are any problems.