12-Mar-2015, 00:16
I honestly can't understand how downloading the same configuration onto the SD card from the on-line configurator can make any difference. Maybe there's something else going on.
Something slightly odd happens occasionally when I power up my 200 when the pre-outs are configured as outputs; under some circumstances they are left as inputs (which in your set-up would mute the headphones, in mine it mutes my sub-woofer). This might be some kind of safety mechanism, I don't know. Resetting the amp using the front panel button sorted it for me.
The process is a little fiddly and I can't exactly remember off the top of my head how to do it. It goes something like: press the front-panel button to put the amp in standby, release it, and then press it and hold it down. You should see a short count-down after which it will reset itself.
Something slightly odd happens occasionally when I power up my 200 when the pre-outs are configured as outputs; under some circumstances they are left as inputs (which in your set-up would mute the headphones, in mine it mutes my sub-woofer). This might be some kind of safety mechanism, I don't know. Resetting the amp using the front panel button sorted it for me.
The process is a little fiddly and I can't exactly remember off the top of my head how to do it. It goes something like: press the front-panel button to put the amp in standby, release it, and then press it and hold it down. You should see a short count-down after which it will reset itself.
Roon (Mac Mini), Wilson Benesch Full Circle, Expert 1000 Pro CI, Kaiser Chiara
Warwickshire, UK
