Posts: 1,506
Threads: 73
Joined: Feb 2015
Reputation:
10
Hi
My Melco can be set up to either of two options depending on the USB-DAC.
PCM over DSD
Convert to PCM
Which one should I use on the 200?
Devialet 200 -- Roon Nucleus-- Sonus Faber Olympica 2 -- Tellurium Q Black Speaker Cables --
Chord Qutest -- Niimbus US5 Pro Headphone amp —HifiMan HEK, Abyss 1266TC
Newcastle upon Tyne, England
Posts: 383
Threads: 16
Joined: Sep 2014
Reputation:
2
I would suggest the DSD over PCM (DoP) because it MAY sound better. Why? The Devialet converts (someone correct me if I am wrong) everything to 40 bit 384 kHz for processing. If you set the Melco to convert DSD to PCM, you are adding another processing step which may not be transparent.
Synology 713+ -> Aurender N10 -> D 200 -> Legacy Audio Focus SE speakers. ClearAudio Emotion TT. Synergistic Atmosphere Level 3 UEF Speaker and Galileo (USB) Interconnects and Synergistic PowerCell UEF S - Virginia U. S. A.
Posts: 1,506
Threads: 73
Joined: Feb 2015
Reputation:
10
(12-Nov-2015, 16:18)rwjr44 Wrote: I would suggest the DSD over PCM (DoP) because it MAY sound better. Why? The Devialet converts (someone correct me if I am wrong) everything to 40 bit 384 kHz for processing. If you set the Melco to convert DSD to PCM, you are adding another processing step which may not be transparent.
Brilliant thank you, thats what i have it set at now.
Devialet 200 -- Roon Nucleus-- Sonus Faber Olympica 2 -- Tellurium Q Black Speaker Cables --
Chord Qutest -- Niimbus US5 Pro Headphone amp —HifiMan HEK, Abyss 1266TC
Newcastle upon Tyne, England
Posts: 433
Threads: 20
Joined: Apr 2015
Reputation:
3
i dont know if we have the full story on what upsampling is done or when it is done.
you should try both! as soon as hq player is integrated into roon im going to spend a lot of time figuring out the best sampling rates
Amp - Devialet 400 Speakers - vivid audio B1 Speaker cable - audioquest oak Power conditioner - furman SPR 16IE Source - audio PC with paul pang audio usb card v3 and paul pang red dual usb cable running through jplay. usb card powered by teddy pardo power supply Source 2 - line in from integra AV receiver (TV)
Posts: 383
Threads: 16
Joined: Sep 2014
Reputation:
2
13-Nov-2015, 18:02
(This post was last modified: 13-Nov-2015, 21:08 by rwjr44.
Edit Reason: minor grammar
)
(12-Nov-2015, 15:25)Womaz Wrote: Hi
My Melco can be set up to either of two options depending on the USB-DAC.
PCM over DSD
Convert to PCM
Which one should I use on the 200?
(12-Nov-2015, 23:11)completeluxury Wrote: i dont know if we have the full story on what upsampling is done or when it is done.
you should try both! as soon as hq player is integrated into roon im going to spend a lot of time figuring out the best sampling rates
I understand your desire to experiment, I do a lot of experimenting myself. The point is that whatever we do before it enters a Devialet, the Devialet will convert that to 40/384. Perhaps there is some synergistic combination that will make the Devialet sing?
Synology 713+ -> Aurender N10 -> D 200 -> Legacy Audio Focus SE speakers. ClearAudio Emotion TT. Synergistic Atmosphere Level 3 UEF Speaker and Galileo (USB) Interconnects and Synergistic PowerCell UEF S - Virginia U. S. A.
Posts: 1,506
Threads: 73
Joined: Feb 2015
Reputation:
10
Devialet 200 -- Roon Nucleus-- Sonus Faber Olympica 2 -- Tellurium Q Black Speaker Cables --
Chord Qutest -- Niimbus US5 Pro Headphone amp —HifiMan HEK, Abyss 1266TC
Newcastle upon Tyne, England
Posts: 433
Threads: 20
Joined: Apr 2015
Reputation:
3
are you sure about the 40/384 though?
the 2 DAC's that it uses per channel are 24/192 each so wouldnt it convert it to 24/384?
Amp - Devialet 400 Speakers - vivid audio B1 Speaker cable - audioquest oak Power conditioner - furman SPR 16IE Source - audio PC with paul pang audio usb card v3 and paul pang red dual usb cable running through jplay. usb card powered by teddy pardo power supply Source 2 - line in from integra AV receiver (TV)
Posts: 433
Threads: 20
Joined: Apr 2015
Reputation:
3
haha sorry my bad. i meant basically if it uses 24/192 per channel, why would the output be 40/384 instead of 24/384
Amp - Devialet 400 Speakers - vivid audio B1 Speaker cable - audioquest oak Power conditioner - furman SPR 16IE Source - audio PC with paul pang audio usb card v3 and paul pang red dual usb cable running through jplay. usb card powered by teddy pardo power supply Source 2 - line in from integra AV receiver (TV)