Posts: 433
Threads: 20
Joined: Apr 2015
Reputation:
3
When i upgraded the firmware i made a completely new configuration from scratch.
i had zero of the issues described re SAM etc everything works perfectly.
perhaps people using old configurations need to bite the bullet and make a new configuration if they havent already. only takes 2 seconds
Amp - Devialet 400 Speakers - vivid audio B1 Speaker cable - audioquest oak Power conditioner - furman SPR 16IE Source - audio PC with paul pang audio usb card v3 and paul pang red dual usb cable running through jplay. usb card powered by teddy pardo power supply Source 2 - line in from integra AV receiver (TV)
Posts: 579
Threads: 4
Joined: May 2014
Reputation:
20
one more change in the new configurator that can affect the bass performance: the subsonic filter is now enabled by default.
That should not matter for an LS50 but who knows...
Posts: 194
Threads: 12
Joined: Oct 2014
Reputation:
2
What exactly does the subsonic filter do?
Has Devialet ever released any documentation explaining in detail these kind of things or has it been up to us to learn it via this forum?
Posts: 132
Threads: 5
Joined: Aug 2014
Reputation:
0
16-May-2015, 14:18
(This post was last modified: 16-May-2015, 15:40 by Stigmater.)
(16-May-2015, 14:08)Vivialet Wrote: one more change in the new configurator that can affect the bass performance: the subsonic filter is now enabled by default.
That should not matter for an LS50 but who knows...
It was enabled on 7.1.3 and on 7.1.1 by default as well, and I know it for sure because every time I did my config file from scratch i had to disable it.
Devialet 800| B&W 802 Diamond | JL 113 | Linn Akurate DS + Denon HEOS for Spotify | Stealth Reverie speaker cables| Audioprana AES/RCA | DH LABS PC
Posts: 353
Threads: 28
Joined: Feb 2015
Reputation:
10
(16-May-2015, 01:59)pete86 Wrote: Also, I have one remote button assigned to RAM and one to SAM. A long press of the SAM button brings up the tone control menu. Not sure if the same applies with ICM.
Ha! It works! I can assign the ICM on/off to the invert button (long press displays system settings) and SAM on/off to the bass button (long press displays balance, tone, and SAM controls).
I can also confirm that SAM defaults to 100% when activated.
Kii Three Speakers | JL Audio Fathom Subwoofer | KEF LS50 Speakers | Samsung 850 Soundbar
Innuos Statement | Trinnov Altitude 32 | PS Audio Stellar S300 Amp | T+A HA 200 Headphone Amplifier | Meze Empyrean Headphones
Sean Jacobs DC-3 Custom Build LPS | Roon Core DIY Server | SOtM sNH-10G Modded Switch | Oppo UDP-205 Blu-Ray/SACD Player
T+A G 2000 R Turntable | DS Audio E1 Optical Stylus | Gordian Lab 12 Power Conditioner | Artesania Audio Rack
Posts: 1,642
Threads: 43
Joined: Aug 2014
Reputation:
35
16-May-2015, 15:51
(This post was last modified: 16-May-2015, 18:29 by Axel.)
(16-May-2015, 14:18)wikeeboy Wrote: What exactly does the subsonic filter do?
Has Devialet ever released any documentation explaining in detail these kind of things or has it been up to us to learn it via this forum?
It stops low frequency sounds from reaching the speakers and potentially damaging them. Especially handy for playing vinyl where the low frequencies can cause frightening excursion of your woofers, for example when the needle hits the groove.
Project Eperience X Pack with Ortofon Rondo Red MC, Oppo BDP 105D, 2 x Sonos Connect, QNAP HS251+ NAS with 2 X 6TB Western Digital Red, Mac 5K 32GB running Lifetime Roon, iPad Pro 12.9" for remote control. Etalon Ethernet Isolator, Devialet 440 Pro CI, Sonus faber Olympica ll with Isoacoustics Gaia ll feet, Auralic Taurus Mkll headphone amp., Denon AH-D5000, Sennheiser HD600 and HD800 with Cardas cable, Van Den Hul The First Ultimate and Crystal interconnects, Furutech power cables, GSP Audio Spatia speaker cable.
South Coast England
Posts: 132
Threads: 5
Joined: Aug 2014
Reputation:
0
16-May-2015, 15:57
(This post was last modified: 16-May-2015, 16:46 by Stigmater.)
Just got back from vacation so couldn't upgrate the firmware earlier, I have to say that I very like what I hear.
Recently I switched from magico S1 to YG Carmel due to too digital accent, coming out of magico.
After couple of weeks with YG Carmel even thoug sound was much more analog and more pleasant I started to feel that i need some more on the lower octave and I even started to look a replacement for Carmel.
Now after upgrade, I fully enjoy my setup, the bass get richer and deeper, the highs are great, (at 7.1.3 I felt a little harshness in highs), and DSD is a great bonus.
The most analog and pleasant sound that I heard from Devialet so far.
So life is beautiful again 
Devialet 800| B&W 802 Diamond | JL 113 | Linn Akurate DS + Denon HEOS for Spotify | Stealth Reverie speaker cables| Audioprana AES/RCA | DH LABS PC
Posts: 9
Threads: 1
Joined: May 2015
Reputation:
1
(15-May-2015, 19:28)ICarrascosa Wrote: Good afternoon,
I just installed the update.
JRiver I have the player, if selected in the output options.
1) None
2) Dolby Digital
3) DSD in dop format
4) 2xDSD one dop format
If I select DSD, when I hear the music I hear interference or continuous breath.
If I have nothing, I hear nothing.
To always listen DSD highest quality even as I have to do with JRiver, if anyone can make a mini tutorial, I would appreciate.
someone can help me , thanks
Posts: 1,999
Threads: 23
Joined: May 2014
Reputation:
44
(15-May-2015, 11:47)Antoine Wrote: I've also done the upgrade, all went well except for one very particular bug. When I start music playback through USB (default input) right after power on it seems like the volume of the pre-outs (used for my sub) are at 100%, this is immediately corrected as soon as I touch the volume dial. It however can cause quite a scare depending on the music played, bass heavy music causes a little earth quake!
Has anyone else noticed similar behaviour? I will report it to Devialet later as well, I am thinking about recreating my config from scratch. So far, for 8.0 I have only edited it to update it.
OK, made the config from scratch but compared the files using diffchecker.com and they are identical. So I will report the issue to Devialet. Strange that no other users, using sub through pre-out, have noticed this issue or perhaps they just haven't mentioned it here.
PS Audio P3, Shunyata ΞTRON Alpha Digital and HC/Furutech power cables, Paul Hynes SR7EHD-MR4, DIY Roon Server & Roon Endpoint running AudioLinux Headless, Phasure Lush^2 USB cable, Audioquest Diamond RJ/E ethernet, Uptone Audio etherREGEN, Mutec MC-3+ USB, Shunyata ΞTRON Anaconda Digital XLR AES/EBU, Devialet Expert 250 Pro CI, Nordost Tyr Reference LS cables, Von Schweikert VR-5 SE Anniversary Edition, Anti-Mode Dual Core 2.0, JL Audio Fathom F112. More detail here.
The Netherlands
Posts: 106
Threads: 1
Joined: Jun 2014
Reputation:
2
I reconfigured my Devialet and now it's no longer louder than before. So it must have been a configuration issue.
|
