Posts: 300
Threads: 17
Joined: Jan 2015
Reputation:
1
I can't control the volume with my Devialet remote after upgrading to the the Golds with the new DOS. I can't connect the remote to the Golds again (by holding them on the bottom of the Golds).
Any ideas ?
Formerly Devialet 220PRO CI, Magico A3, 2 Gold Phantoms, Dialog/Raspberry PI2 Digi+, ROON Rock NUC8i3, Bluesound Powernode 2i, B&W 607, Audirvana
Posts: 3
Threads: 1
Joined: Nov 2019
Reputation:
0
After Dos2 update my remote did not work either.
Held it upside down on top of my one gold and it reconnected again.
Posts: 79
Threads: 8
Joined: Nov 2015
Reputation:
3
Yes remote should be upside down on top of the Phantom in order to pair.
Sent from my LM-V450 using Tapatalk
Posts: 22
Threads: 5
Joined: Sep 2017
Reputation:
1
When running DOS1 I had to re-connect my remote (howering upside down) quite often, but now when I have upgraded to DOS2 it is working much better, far more stable - i.e. my remote is working very well in DOS2 with my two Golds.
/Anders
Posts: 300
Threads: 17
Joined: Jan 2015
Reputation:
1
Thanks. reconnecting by holding them only on the bottom of the Golds didn't worked. I had to plug of the power of the Dialog and the Phantoms and the remote and had to reboot the whole system.
Formerly Devialet 220PRO CI, Magico A3, 2 Gold Phantoms, Dialog/Raspberry PI2 Digi+, ROON Rock NUC8i3, Bluesound Powernode 2i, B&W 607, Audirvana
Posts: 18
Threads: 0
Joined: Dec 2015
Reputation:
0
(18-Nov-2019, 07:29)midi Wrote: Thanks. reconnecting by holding them only on the bottom of the Golds didn't worked. I had to plug of the power of the Dialog and the Phantoms and the remote and had to reboot the whole system.
I had to reconnect as well but could manage it w/o unplugging. the usual procedure took a bit longer then before but was confirmed (after 10-15 sec.) by a short signal tone from the Gold.
1000 Pro, Wilson Audio Sophia 3, SOtM-200 Ultra Neo, Mutec REF10/MC-3 + USB, NUC/Audiolinux, Phantom white & gold
Posts: 6
Threads: 0
Joined: Dec 2020
Reputation:
0
Hello,
I have just installed 2 Phantoms Premier G in stereo ; but I cannot manage to connect the remote (new flat model) to any of them
Nothing happens when I approach the remote in pairing mode on top, in front,...
Somebody had/has the same issue ? Any idea about the way to connect it ?
Thanks
Posts: 6
Threads: 0
Joined: Dec 2020
Reputation:
0
Thanks for answer ; I will try this
but... I also read that the new remote works with minimum firmware 2.11
My two phantoms are 2.10 but Devialet app shows that they are up to date... and does not propose any update to send them
Possible to "force" a firmware update ?
Thanks