Posts: 1
Threads: 1
Joined: Oct 2020
Reputation:
0
Hello, recently installed in cabinet and unit is slightly warmer than when not in cabinet. I could install a vent fan but would prefer not to if operating temp is fine. Is there a spot on exterior where I should measure temp and what would max temp be at that location?
TIA
Carl
Devialet Expert Pro 140
Focal Aria 926
Rega P6
Devialet Dione
Old as Dirt
Posts: 18
Threads: 0
Joined: Jun 2022
Reputation:
0
Does the 140 have integrated temperature sensors?
The warmest my 220 has reported was 47° C
To display it you need to long press the "Tone" button on the remote, then tap the same button untill you reach the sensor screen.
Unsure about max temperatures. Adding some vents in the cabinet might be enough, even without fans.
Sennheiser AMBEO Soundbar KEF KC62 | Devialet Expert 250 Pro KEF LS50 Meta | KEF LSX
Posts: 1,032
Threads: 10
Joined: Apr 2017
Reputation:
97
The 140 has internal temperature sensors which you display in the same way described in post #2.
Roon Nucleus+, Devilalet Expert 140 Pro CI, Focal Sopra 2, PS Audio P12, Keces P8 LPS, Uptone Audio EtherREGEN with optical fibre link to my router, Shunyata Alpha NR and Sigma NR power cables, Shunyata Sigma ethernet cables, Shunyata Alpha V2 speaker cables, Grand Prix Audio Monaco rack, RealTRAPS acoustic treatment.
Brisbane, Qld, Australia
Posts: 22
Threads: 1
Joined: May 2023
Reputation:
1
220 - supply 48
A amp - 42
D amp - 42
Posts: 22
Threads: 1
Joined: May 2023
Reputation:
1
Every amp runs hot. Even class d.
Posts: 130
Threads: 17
Joined: Jun 2020
Reputation:
0
Put something underneath. When I put Isoacoustics MiniPucks ($99 for 8 pieces) the temperature felt down for some 3-4 degrees. Btw, my 220 CI never went over 48 .. with mini pucks, not over 44 or 45
A) Devialet Expert 220 Pro CI, Audioquest NRG-Z3 — B) Pass Labs XA 30.8, Lampizator Amber V4.0, Innuos Pulse, Dynaudio Evoke 50, Ansuz PowerSwitch X-TC, WireWorld power cables
Posts: 12
Threads: 1
Joined: Oct 2017
Reputation:
1
Partially in topic. I have two d premier in dual mono, everyime I stop listening, I switch off the master (no idle mode). I realized yesterday that the companion, was running still hot after hours after switching off.
It means it remained on even the master was off. Is that normal?